|
|
> pwtpcbs.com > Glossary of PCB terms
Controlled impedance.:
The process that give a circuit the correct impedance value. The design engineer will specify the track impedance required. From this, a suitable manufacturing build will be chosen
to the suit track widths and layer spacings on the design to meet the required impedance.
< PCB terms Glossary
Acid Trap, Annular Ring, Aperture, Aperture List,
Artwork, ATE, Bare Board, Base Material,
Bill of Materials, Blind Via, Breakout, Bridging,
Buried Via, Chamfer, Circuit, Circuit Layer,
Component Hole, Conductor Spacing, Controlled impedance,
Design Rules Check, DFM, Dielectric Constant, Double-sided board, Drill Table, Edge Connector,
Electroless Nickel - Immersion Gold, Etch Factor, Etching,
Fiducial, Flash, FR-4, Gerber Data, Ground Plane, HASL, HPGL, Inner Layer, Land, Legend, Microsectioning, Mil, Misregistration, Mixed Technology, Multilayer Board, Net, Net End, Netlist, Nick, Open,
Pad, Panel, PCB, Photoplotter, Photoresist, Plated Through Hole, PTH, PWT,
Resist, Router, RS-274-X, Scoring, Screen Printing, Single Sided Board, SMOBC, SMT,
Solder Mask, Solder resist, Solder Side, Step &
Repeat, Surface Mount Technology, Teardrop, Tester,
Thermal Relief, Track, Underwriters Laboratories (UL), Via,
WYSIWYG.
|  |
